The 4060 90Wh battery is our most compact unit, great for monitors or cameras that pose a light load. Internal protection circuits monitor cell balance, temperature, over charge and over discharge to insure safe and proper operation.
The 4010 150Wh battery is our mid-size unit, great for cameras w/lights, firestore, etc. Internal protection circuits monitor cell balance, temperature, over charge and over discharge to insure safe and proper operation.
The RED BRICK is a 140Wh V-Mount battery pack designed specifically for the RED ONE camera. It mounts on the camera via the RED V-MOUNT PLATE. The RED BRICK has a small five-lamp status indicator that is activated by pressing a small, recessed button on the side of the battery. When charging, the battery status indicator switches to a charge status indicator. When all five lights are illuminated, the battery is charged.
The Red Charger is a sequential V-Mount charger designed for the Red Brick. It can hold two batteries at a time, though it charges them sequentially (fills one first, then the other). It also has the 6-pin, 12v LEMO power connector to power the camera from AC.
The Switronix GPTS is a "hot swap" power adapter that mounts directly to your existing V-plate. Batteries are mounted side by side, so you can easily remove the depleted battery while leaving the other battery connected so there is never any down time.
The VL-4S is a four-channel, simultaneous Li-Ion (Lithium-Ion) fast charger. Up to four Li-Ion Endura V-mount batteries can be charged in 2.5 hours or less.